MacLean Dixie HFS


Towers > Towers and Guyed Structures

Print Page
Home > Towers > Towers and Guyed Structures

1-1/2",1-3/4" , 2" RCS (Round Corner Square) Guy / Tension Anchors

 MacLean Civil is the only supplier awarded ESR3032 by ICC-ES for ICC AC358 Acceptance Criteria for Helical Foundation Systems and Devices for both RCS and pipe helical piles. 


 

 
 

 

 

RCS  (Round Corner Square)

MacLeanCivil offers a wide range of steel helical anchor systems to provide a cost effective solution for the guyed application.  Selection depends on the soils and loads.

The appropriate helical anchor is selected and installed to the required depth and at the location designated by the engineering plan.  Torque monitoring by a certified MacLean-Civil installer assures each helical pile is installed to the required specification.

A lead consists of one or more helices or bearing plates attached to a shaft and is rotated vertically into the ground.  The helices will provide the bearing area to support the structure load.

Various size RCS (round corner square) screw anchors are used to best match the load requirements depending on the location.

Extensions are added as necessary for the helices to reach suitable bearing soil.  A guy adapter is added to the top of the last installed section to terminate the guy cable.  A variety of guy terminations can be selected.  The screw anchor can be loaded immediately after installation.

 

 

 1-1/2" RCS    D6

For Product Information:  PIB 020-1


Leads 1-1/2" RCS D6 (5500 ft-lbs) 55 KIP Ultimate Tension / Compression
Catalog Number Helical Lead Length in (mm) Helix Size in (mm) Weight Ea (lbs)
D660S8 60 8 45
D660S10 60 10 47
D660S12 60 12 51
D660S810 60 8-10 51
D660S1012 60 10-12 59
D684S8 84 8 59
D684S12 84 12 67
D684S810 84 8-10 67
D684S1012 84 10-12 75
D684S81012 84 8-10-12 79
D684S101214 84 10-12-14 91
Notes:
1)  Standard is galvanized.  Add suffix "U" for black (not galvanized). 
2)  Other sizes are available on request.
3)  All material for either the foundation pile or tension anchor must be MacLeanCivil or warranty is invalid
 

 


Extensions 1-1/2" RCS D6
Catalog Number Length (In) Weight Ea (lbs)
D6E42 42 28
D6E60 60 41
D6E84 84 57
D6E120 120 81
Notes:
1)  Standard is galvanized.  Add suffix "U"  for black (not galvanized). 
2)  Other sizes are available on request.
 

Extension with Helix 1-1/2" RCS D6
Catalog Number Helical Lead Length in (mm) Helix Size in (mm) Weight Ea (lbs)
D6E42S14 42 14 44
D6E60S12 60 12 52
D6E60S14 60 14 56
D6E84S14 84 14 72
Notes:
1)  Standard is galvanized.  Add suffix "U" for black (not galvanized)
2)  Other sizes are available upon request.
 
 1-1/2" RCS   D7
For Product information:  PIB021

Leads 1-1/2" RCS D7 (7000 ft-lbs) 70 KIP Ultimate Tension / Compression
Catalog Number Helical Lead Length in (mm) Helix Size in (mm) Weight Ea (lbs)
D760S8 60 8 43
D760S10 60 10 47
D760S12 60 12 51
D760S810 60 8-10 51
D760S1012 60 10-12 59
D784S8 84 8 59
D784S10 84 10 63
D784S12 84 12 67
D784S810 84 8-10 67
D784S1012 84 10-12 75
D784S81012 84 8-10-12 79
D784S101214 84 10-12-14 91
Notes:
1)  Standard galvanized.  Add suffix "U" for black (not galvanized). 
2)  Other sizes available on request.
3)  All material for either the foundation pile or tension anchor must be MacLeanCivil or warranty is invalid.
 

Extensions 1-1/2" RCS D7
Catalog Number Length (In) Weight Ea (lbs)
D7E42 42 28
D7E60 60 41
D7E84 84 57
D7E120 120 81
Notes:
1)  Standard Galvanized.  Add suffix "U" for black (not galvanized). 
2)  Other sizes available on request
 

Extensions with Helix 1-1/2" RCS D7
Catalog Number Helical Lead Length in (mm) Helix Size in (mm) Weight Ea (lbs)
D7E42S14 42 14 44
D7E60S12 60 12 52
D7E60S14 60 14 56
D7E84S14 84 14 72
Notes:
1)  Standard is galvanized.  Add suffix "U" for black (not galvanized)
2)  Other sizes are available upon request.
 

Leads 1-3/4" RCS D10 (10,000 ft-lbs) 100 KIP Ultimate Tension / Compression
Catalog Number Helical Lead Length in (mm) Helix Size in (mm) Weight Ea (lbs)
D1060S8 60 8 58
D1060S10 60 10 62
D1060S12 60 12 65
D1060S810 60 8-10 66
D1060S1012 60 10-12 73
D1084S8 84 8 81
D1084S10 84 10 85
D1084S12 84 12 89
D1084S810 84 8-10 89
D1084S1012 84 10-12 97
D1084S81012 84 8-10-12 101
D1084S101214 84 10-12-14 114
Notes:
1)  Standard Galvanized.  Add suffix "U" for black (not galvanized). 
2)  Other sizes available on request.
3)  All material for either the foundation pile or tension anchor must be MacLeanCivil or warranty is invalid 
 

Extensions 1-3/4" RCS D10
Catalog Number Length (In) Weight Ea (lbs)
D10E42 42 38
D10E60 60 55
D10E84 84 76
D10E120 120 109
Notes:
1)  Standard Galvanized.  Add Suffix "U" for black (not galvanized). 
2)  Other sizes available on request
 

Extensions with Helix 1-3/4" RCS D10
Catalog Number Helical Lead Length in (mm) Helix Size in (mm) Weight Ea (lbs)
D10E42S14 42 14 54
D10E60S12 60 12 66
D10E60S14 60 14 70
D10E84S14 84 14 92
Notes:
1)  Standard is galvanized.  Add suffix "U" for black (not galvanized)
2)  Other sizes are available upon request
 

 2" RCS  D15

For Product Information:   PIB023


Leads 2" RCS D15 (15,000 ft-lbs) 150 KIP Ultimate Tension / Compression
Catalog Number Helical Lead Length in (mm) Helix Size in (mm) Weight Ea (lbs)
D1560T8 60 8  
D1560T10 60 10 81
D1560T12 60 12 86
D1560T810 60 8-10 87
D1560T1012 60 10-12 96
D1584T8 84 8 97
D1584T10 84 10 102
D1584T12 84 12 107
D1584T810 84 8-10 115
D1584T1012 84 10-12 115
D1584T81012 84 8-10-12 131
D1584T101214 84 10-12-14 146
D15120T8101214 120 8-10-12-14 195
Notes:
1)  Standard galvanized.  Add suffix "U" for black (not galvanized). 
2)  Other sizes available on request.
3)  All material for either the foundation pile or tension anchor must be MacLeanCivil or warranty is invalid.
 

Extensions 2" RCS D15
Catalog Number Length (In) Weight Ea (lbs)
D15E42 42 63
D15E60 60 84
D15E84 84 97
D15E120 120 135
Notes:
1)  Standard galvanized.  Add suffix "U" for black (not galvanized). 
2)  Other sizes available on request.
 

Extensions with Helix 2" D15
Catalog Number Helical Lead Length in (mm) Helix Size in (mm) Weight Ea (lbs)
D15E42T14 42 14 71
D15E60T12 60 12 99
D15E60T14 60 14 104
D15E84T14 84 14 117
Notes:
1)  Standard is galvanized.  Add suffix "U" for black (not galvanized)
2)  Other sizes are available upon request.
 

 

 Guy Terminations for 1-1/2"  RCS Shafts

For Product Information:  PIB015

   
     

 

 

 

The cast guy adapters incorporate an integral lifting eye.  The guy tensioning devise (come-a-long) is attached directly to the lifting eye eliminating the need for an extra adapter.  The lifting eye is rated at 12,000 lbs. ultimate.


Guy Adapters for RCS anchors
Catalog Number For RCS Anchors Ultimate Tension Rating (lbs) Number of Guys Weight Ea (lbs)
D6606US 1-1/2" 70,000 3  
 
 Guy Adapter for 1-3/4" RCS Shafts

 

 

 


Guy Adapter for 1-3/4" RCS Anchors
Catalog Number For RCS Anchors Ultimate Tension Rating (lbs) Number of Guys Weight Ea (lbs)
D2801-0002 1-3/4" 100,000 3  
 


MacLean Civil

©2019 MacLean Civil HFS

Web site design and web site development by Americaneagle.com